Hardware configuration

harddrake2

This tool[11] gives a general view of the hardware of your computer. When the tool is launched, it executes a job to look for every element of the hardware. For that, it uses the command ldetect which refers to a list of hardware in ldetect-lst package.

Dritarja

Dritarja është e ndarë në dy kolona.

Kolonën e majtë përmban një listë të pajisjeve-elektronike të zbuluara. Pajisjet janë të grupuara sipas kategorive. Kliko në> për të zgjeruar përmbajtjen e një kategorie. Çdo pajisje mund të përzgjidhet në këtë kolonë.

The right column displays information about the selected device. The Help -> Fields description gives some information about the content of the fields.

According to which type of device is selected, either one or two buttons are available at the bottom of the right column:

  • Set current driver options: this can be used to parameterize the module which is used in relation to the device. This must used by experts only.

  • Run config tool: access to the tool which can configure the device. The tool can often be accessed directly from the MCC.

Menyja

Opsione

The options menu gives the opportunity to check boxes to enable automatic detection:

  • modemi

  • Pajisje jaz

  • Zip parallel devices

By default these detections are not enabled, because they are slow. Check the appropriate box(es) if you have this hardware connected. Detection will be operational the next time this tool is started.



[11] You can start this tool from the command line, by typing harddrake2 as root.


CC BY-SA 3.0
Uploaded on 14/07/2017
loading table of contents...